|
|
|
Removing
the diskette drive
To remove the
diskette drive:
- Turn off
the HMC and peripheral devices and disconnect all power cords.
- Unlock and
remove the side cover. (Refer to Removing
and Replacing the Cover.)
- Remove the
lower bezel. (Refer to Removing
and Replacing the Lower Bezel.)
- Remove the
upper bezel. (Refer to Removing
and Replacing the Upper Bezel.)
Start
the video ...
- Disconnect
the power cable and signal cable from the drive that is to be
removed.
- Press and
hold the blue release button on the side of the bay to release
the drive. Then, pull the drive out of the front of the HMC.
- Remove
the drive retainer clip from the side of the drive. Save the clip
to use when you install the replacement drive.
- If you are
instructed to return the diskette drive, follow all packaging
instructions, and use any packaging materials supplied to you
for shipping.
|
|
|
|
|
|