|
Removing
the upper bezel
To remove the
upper bezel:
- If you are
replacing a non-hot-swap component, turn off the HMC and all attached
devices. Then, disconnect all power cords and external cables.
- Unlock and
remove the side cover. (Refer to Removing
and Replacing the Cover.)
- Remove the
lower bezel. (Refer to Removing
and Replacing the Lower Bezel.)
- Carefully
pull the two bezel clips on the left side of the upper bezel away
from the chassis. Then, rotate the upper bezel to the right side
of the HMC to disengage the two right-side tabs from the chassis.
- If you are
instructed to return the upper bezel, follow all packaging instructions,
and use any packaging materials that are supplied to you for shipping.
|