| |
Making
the Cable Connections - Model 7042-CR4 Rack Mounted HMC
If you are installing
a 7042-CR4 rack-mounted HMC, refer to the illustration at left as
you complete the following steps. Note that the actual
HMC rear-panel connector layout may differ somewhat from the one
presented here.
1. Plug the power cord into the HMC.
2. Connect the keyboard, display, and mouse using the USB conversion option cable.
3. Connect the modem.
- If you are using an external modem, connect the modem data cable to the external HMC modem. Connect the modem data cable to the Serial 1 port on the HMC. Use the telephone cable to connect the line port of the external modem to the analog telephone jack on your wall.
- If you are using the integrated modem on the HMC, use the data cable to connect the integrated HMC modem to the appropriate data source. For example, use the telephone cable to connect the HMC modem line port to the analog jack on your wall.
|
