Question & Answer
Question
What do these messages from the db2fmp process mean?
Cause
This technote provides some FAQs regarding messages in the db2diag.log in regards to db2fmp processes used to run non-SQL routines such as Java and C.
In some cases the fenced userid may not have permission to write errors to db2diag.log file. For example there is a db2fmp related error such as SQL1131 or SQL4304, but the db2diag.log does not contain any entries. This may be caused by incorrect permission settings by the last process which wrote to the db2diag.log. On UNIX/Linux these would be the umask settings.
$ ls -la ~/sqllib/db2dump/db2diag.log
-rw-rw-rw- 1 db2inst1 system 26827 Apr 24 20:51 /home/db2inst1/sqllib/db2dump/db2diag.log
The temporary work-around is to modify the permission of db2diag.log so everyone can write to it.
chmod 777 db2diag.log
Scenario #1: SQL1042 / -1042
This could be caused by many different causes.
1 (a) Threads in db2fmp process
When the DB2 registry variable DB2_MAX_THREADS_PER_FMP is set you may see the messages below which can be safely ignored. This registry variable was introduced as an enhancement to DB2 via IZ08425.
In some cases the SQL1042 is a legitimate error so its important to note that in this scenario "Max number of thread in fmp reached; no thread created" is the cause of the SQL1042. The SQL1042 can be safely ignored.
Please note that the SQL1042 is transparent to the application, so no errors will be returned to the application. DB2 automatically starts a new db2fmp process to service the existing or subsequent requests.
2011-01-10-11.31.12.480063-300 I34781A381 LEVEL: Warning
PID : 1200 TID : 1 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerMasterThreadListener,
probe:200
MESSAGE : Max number of thread in fmp reached; no thread created
2011-01-10-12.10.13.923352-300 I74680A573 LEVEL: Warning
PID : 1234 TID : 100 PROC : db2sysc
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-33648 APPID: X.X.X.X.50234.11022217100
AUTHID : DB2INST1
EDUID : 608 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerMasterThreadReq,
probe:89
MESSAGE : FMP reported it could not create a new thread
DATA #1 : Hexdump, 4 bytes
0x000000020210F180 : 0000 0C05 ....
2011-01-10-10.02.25.454418-300 I2221A448 LEVEL: Severe
PID : 1234 TID : 100 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-51434 APPID: X.X.X.X.56427.110218150224
AUTHID : DB2INST1
EDUID : 260 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerGetFmpThread, probe:20
RETCODE : ZRC=0xFFFFFBEE=-1042
1 (b) Operating system resource issue
The messages are very similar to Scenario #1 (a) so how do we determine if the SQL1042 is legitimate? Work backwards and look for preceding messages originating from the same PID and TID.
In the case below we see the source of the error is originating from the operating system (OSERR) and the operating system API which returned the error (pthread_create). pthread_create() is an AIX API indicating that the operating system was unable to create a new thread in the db2fmp process. The root cause is likely an operating system limitation or resource issue when trying to create an additional thread due to the EAGAIN return code.
2011-01-01-13.01.03.345767-240 E287334A401 LEVEL: Severe (OS)
PID : 2609242 TID : 1 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, oper system services, sqloCreateAppThread, probe:100
CALLED : OS, -, pthread_create
OSERR : EAGAIN (11) "Resource temporarily unavailable"
2011-01-01-13.01.03.426469-240 I287736A455 LEVEL: Severe
PID : 2609242 TID : 1 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, trace services, sqlt_logerr_data (secondary logging
func, probe:0
MESSAGE : Failed to create app thread:
DATA #1 : Hexdump, 4 bytes
0x0FFFFFFFFFFFEF60 : 0000 000B ...
2011-01-01-13.01.03.426684-240 I288192A343 LEVEL: Severe
PID : 2609242 TID : 1 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerCreateWorkerThread,
probe:20
RETCODE : ZRC=0xFFFFFBEE=-1042
For Java routines another possibility is insufficient Java heap. Resolve by increasing JAVA_HEAP_SZ to a value larger than the default.
db2 "update dbm cfg using java_heap_sz 32768"
2016-01-26-10.39.35.145179-420 I105233E336 LEVEL: Warning
PID : 125710 TID : 140286945187616 PROC : db2fmp (
INSTANCE: db2inst1 NODE : 000
HOSTNAME: XXX.XXX.XXX
FUNCTION: DB2 UDB, routine_infrastructure, sqlerMasterThreadListener, probe:300
MESSAGE : Java heap is nearly full; no thread created
2016-01-26-10.39.35.146496-420 E105570E561 LEVEL: Warning
PID : 54653 TID : 140525311092480 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-32786 APPID: X.X.X.X.55419.160726173934
AUTHID : db2inst1 HOSTNAME: XXX.XXX.XXX
EDUID : 13114 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerMasterThreadReq, probe:89
MESSAGE : FMP reported it could not create a new thread
DATA #1 : Process ID, 4 bytes
125710
...
2016-01-26-10.39.35.147977-420 I109758E553 LEVEL: Severe
PID : 54653 TID : 140525311092480 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-32786 APPID: X.X.X.X.55419.160726173934
AUTHID : db2inst1 HOSTNAME: XXX.XXX.XXX
EDUID : 13114 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerGetFmpThread, probe:20
RETCODE : ZRC=0xFFFFFBEE=-1042
SQL1042C An unexpected system error occurred.
1 (c) AIX platforms using Power7 processors
There is an incompatibility between the IBM JDK bundled with DB2 v9.7 and Power7. For details refer to the link db2setup or db2fmp (Java) abnormally terminated on Power7
1 (d) Permission issue
Ensure the DB2 instance home directory has the permission below, otherwise the db2fmp may not be able to access files located in ~/sqllib/function
/home $ ls -la
drwxr-xr-x 14 db2inst1 db2admg 4096 Aug 04 10:51 db2inst1/Check the stored procedure binaries in ~/sqllib/function to ensure they are world readable because the fenced userid is usually not the instance owner.
/home/db2inst1/sqllib/function:
-rw-r--r-- 1 db2fenc fencgrp 875 Jul 29 14:24 DUMMY_JAVASP.classCheck the permission of ~/sqllib/adm/db2fmp and ~/sqllib/adm/db2fmp32 to ensure the "other" group has privileges to execute these two files.
chmod o+r db2fmp
chmod o+r db2fmp32After the change you should see:
-r-xr-xr-x 1 db2inst1 db2admg 59384 Jan 1 17:09 db2fmp
-r-xr-xr-x 1 db2inst1 db2admg 74743 Jan 1 17:09 db2fmp32Check permission of DB2 installation directory. If DB2 was installed as root installation then file permission should indicate ownership by "bin" and not another userid. Incorrect permission on installation directory would cause all routines to fail with SQL1042.
/opt/ibm/db2/v105fp5: ls -la
total 196
drwxr-xr-x 43 root sys 4096 Dec 9 11:20 .
drwxr-xr-x. 6 root sys 4096 Aug 28 10:17 ..
drwxr-xr-x 2 bin bin 4096 Nov 29 2014 acs
drwxr-xr-x 2 bin bin 4096 Nov 29 2014 adm
drwxr-xr-x 2 bin bin 4096 Nov 29 2014 adsm
drwxr-xr-x 4 bin bin 12288 Nov 29 2014 bin
...To verify if installation is root or non-root check to see if installation directory is outside of user's home directory via "db2level" command. Another alternative is the db2ls which displays the DB2 installation locations and the user id which installed DB2.
/opt/ibm/db2/v105fp5: db2level
DB21085I This instance or install (instance name, where applicable: "db2inst1")
uses "64" bits and DB2 code release "SQL10055" with level identifier "0606010E".
Informational tokens are "DB2 v10.5.0.5", "s141128", "IP23633", and Fix Pack "5".
Product is installed at "/opt/ibm/db2/v105fp5".Scenario #2: Executing long running query
A remote DB2 client has abnormally terminated when executing a long running query which includes a call to a routine. These messages are informational in nature and can be ignored. However the application should contain some exception handling logic to handle any abnormal terminations. Under the covers DB2 will clean up any non-SQL routines being executed on behalf of the connection. One of the side effects is that the db2diag.log may contain a 0xFFFFFB38 ( SQL1224)
In the example below the message originating from the db2fmp process about "The database manager is not able to accept new requests..." is misleading. The message is originating from the JDBC (db2jcc.jar) used internally by the DB2 server to execute a Java routine and can be ignored. There is nothing wrong with the DB2 database server.
2011-01-12-12.08.33.158935-300 I6813000A541 LEVEL: Error
PID : 9644 TID : 172 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-20965 APPID: X.X.X.X.33819.110220052256
AUTHID : DB2INST1
EDUID : 172 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, common communication, sqlcctcptest, probe:11
MESSAGE : Detected client termination
DATA #1 : Hexdump, 2 bytes
0xFFFFFFFF4B7F3376 : 0036 .6
2011-01-12-12.08.33.170419-300 I6813542A523 LEVEL: Error
PID : 9644 TID : 172 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-20965 APPID: X.X.X.X.33819.110220052256
AUTHID : DB2INST1
EDUID : 172 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, common communication, sqlcctest, probe:50
MESSAGE : sqlcctest RC
DATA #1 : Hexdump, 2 bytes
0xFFFFFFFF4B7F346E : 0036
2011-01-01-12.08.33.170664-300 I6814066A503 LEVEL: Error
PID : 9644 TID : 172 PROC : db2sysc 0
INSTANCE: db2inst11 NODE : 000 DB : SAMPLE
APPHDL : 0-20965 APPID: X.X.X.X.33819.110220052256
AUTHID : DB2INST1
EDUID : 172 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, base sys utilities, sqeAgent::AgentBreathingPoint, probe:10
CALLED : DB2 UDB, common communication, sqlcctest
RETCODE : ZRC=0x00000036=54
2011-01-01-12.08.33.173237-300 I6814570A507 LEVEL: Error
PID : 9644 TID : 172 PROC : db2sysc 0
INSTANCE: db2inst11 NODE : 000 DB : SAMPLE
APPHDL : 0-20965 APPID: X.X.X.X.33819.110220052256
AUTHID : DB2INST1
EDUID : 172 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerInvokeFencedRoutine, probe:40
DATA #1 : Hex integer, 4 bytes
0x804B006D
DATA #2 : Hex integer, 4 bytes
0xFFFFFB38 /* SQL1224 */
2011-01-01-12.08.33.173599-300 E6815078A3474 LEVEL: Severe
PID : 9644 TID : 172 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-20965 APPID: X.X.X.X.33819.110220052256
AUTHID : DB2INST1
EDUID : 172 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerReturnFmpToPool, probe:900
DATA #1 : String, 50 bytes
Marking fmp as unstable, fmp is forced or aborted:
DATA #2 : Boolean, 1 bytes
true
DATA #3 : String, 20 bytes
Fmp entry use count:
DATA #4 : unsigned integer, 4 bytes
1
DATA #5 : String, 8 bytes
Fmp TID:
DATA #6 : Hexdump, 4 bytes
0x000000020079F650 : 0000 0037 /* 0x37 = 55 */
DATA #7 : String, 8 bytes
Fmp row:
DATA #8 : sqlerFmpRow, PD_SQLER_TYPE_FMP_ROW, 496 bytes
fmpPid: 15781
When executing Java routines one additional side effect is that the message below will appear in the db2diag.log. This message is misleading because there is nothing wrong with the database manager on the DB2 server. The message originates from the JDBC driver which is local to the DB2 server used to execute Java routines. This message can be safely ignored.
2011-01-01-12.08.33.213727-300 I6840110A1387 LEVEL: Warning
PID : 15781 TID : 55 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 55 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, BSU Java support, sqlejLogException, probe:10
DATA #1 : String, 962 bytes
com.ibm.db2.jcc.am.DisconnectNonTransientException: [jcc][2055][11259][3.61.86] The database manager is not able to accept new requests, has terminated all requests in progress,
or has terminated this particular request due to unexpected error conditions detected at the target system. ERRORCODE=-4499, SQLSTATE=58009
at com.ibm.db2.jcc.am.ed.a(ed.java:321)
at com.ibm.db2.jcc.t4.ab.T(ab.java:1264)
...
Scenario #3: SQL1131 or SQL4302
This indicates the non-SQL routine was abnormally terminated. The severity of these messages can be misleading because they are reported at "Level: Severe", when in some cases they can be safely ignored.
To determine if this is a legitimate error, check the application logs to look for failures. These errors may appear infrequently ( e.g. few times a month ), but if they appear very frequently or if the application cannot call any non-SQL routines, then this indicates an issue which should be investigated.
2011-02-02-15.01.23.476662-240 I299008A471 LEVEL: Warning
PID : 8245982 TID : 1280 PROC : db2fmp (Java) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 12080 EDUNAME: db2fmp (Java) 0
FUNCTION: DB2 UDB, trace services, sqlt_logerr_data (secondary logging
func, probe:0
MESSAGE : Thread of db2fmp terminated with nonzero rc
DATA #1 : Hexdump, 4 bytes
0x000000011E7685EC : FFFF FB95 /* SQL1131 */ ...
2011-02-02-15.01.23.883044-240 I299480A453 LEVEL: Severe
PID : 8245982 TID : 1280 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-40776 APPID: X.X.X.X.47637.100712165705
AUTHID : DB2INST1
EDUID : 17812 EDUNAME: db2agent (MYDB1) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerDisassociateWithFmp,
probe:30
RETCODE : ZRC=0xFFFFFB95=-1131
Legitimate SQL1131 errors:
If all calls to non-SQL routines fail, this indicates a configuration or environmental problem outside of DB2. For example, some systems have security software installed preventing db2wdog process from being created. Since db2wdog forks db2fmp processes, it would prevent any non-SQL routine from running. Check with your system administrator regarding restrictive security software.
If a specific or set of non-SQL routines intermittently fail frequently, this may be an indication of a programming error by the author of the routine.
Scenario #4: Marking fmp as unstable
This message is returned when DB2 decides to shut down a db2fmp process and can be part of normal DB2 operations. DB2 automatically picks a new db2fmp or creates a new db2fmp process to execute any subsequent calls to stored procedures or UDFS.
To determine whether this message is more than informational please check for additional db2diag.log entries around the same timestamp which return a ZRC return code, 0xFFFFxxxx return code or an error from the operating system (OSERR). Please use the db2diag tool to decode these return codes.
This message may also be returned when:
- DBM CFG parameter KEEPFENCED=NO since DB2 would terminate any db2fmp process after a routine has completed execution.
- FORCE APPLICATIONS was issued or if "db2stop force" was called.
2011-01-10-12.01.55.448367+000 E288536A3366 LEVEL: Severe
PID : 582 TID : 9823 PROC : db2sysc 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-40834 APPID: X.X.X.X.47961.100712170155
AUTHID : DB2INST1
EDUID : 18069 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, routine_infrastructure, sqlerMasterThreadReq,
probe:901
DATA #1 : String, 50 bytes
marking fmp as unstable:
DATA #2 : String, 8 bytes
Fmp TID:
DATA #3 : Hexdump, 4 bytes
0x078000000113B770 : 0000 0000 ....
DATA #4 : String, 8 bytes
Fmp Row:
DATA #5 : sqlerFmpRow, PD_SQLER_TYPE_FMP_ROW, 504 bytes
fmpPid: 2609242
fmpPoolList Ptr: 0x0000000000000000 fmpForcedList Ptr:
0x0000000000000000
nextFmpCB Ptr: 0x0780000000ed6980 prevFmpCB Ptr: 0x078000000100ea20
fmpIPCList Ptr: 0x0780000001138960
stateFlags: 0x00000013 numFmp32Attaches: 0
numActiveThreads: 41 numPoolThreads: 0
fmpCodePage: 1252 fmpRowUseCount: 42
...
...
2011-01-10-12.01.56.172884+000 I2049780A492 LEVEL: Warning
PID : 7131362 TID : 1 PROC : db2agent (SAMPLE) 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-1333 APPID: X.X.X.X.17420.0710250420
AUTHID : DB2INST1
FUNCTION: DB2 UDB, trace services, sqlt_logerr_data, probe:0
MESSAGE : Removing FMP from pool
DATA #1 : Hexdump, 16 bytes
2011-01-10-12.01.56.172890+000 I2040223A1335 LEVEL: Error
PID : 7131362 TID : 1 PROC : db2agent (SAMPLE) 0
INSTANCE: db2inst1 NODE : 000 DB : SAMPLE
APPHDL : 0-1333 APPID:X.X.X.X.17420.0710250420
AUTHID : DB2INST1
FUNCTION: DB2 UDB, oper system services, sqlossig, probe:10
MESSAGE : Sending SIGKILL to the following process id
DATA #1 : signed integer, 4 bytes
7016538
The SIGKILL can be safely ignored since it is returned when DB2 brings down the db2fmp.
The meaning of the stateFlags can be decoded via the chart provided in the technote below Accumulation of db2fmp (Java) processes.
Scenario #5: Messages related to Java memory
Please see the technote db2fmp (Java) Memory Issues in the links below.
Scenario #6: Data Partitioned System
On systems using data partitioning, please ensure that the fenced userid exists on ALL partitions and that the fenced userid is a member of the Instance owners group. Otherwise SQL1042C may be returned. Most of the DB2 table snapshot functions are implemented as non-SQL routines.
db2 "select count(*) from SYSIBMADM.TBSP_UTILIZATION"
SQL1042C An unexpected system error occurred. SQLSTATE=58004
Scenario #7: SQL0952N Processing was cancelled due to an interrupt.
If the application calling the routine cancelled the call, -952 will be reported in the db2diag.log. The application may have canceled the routine because there was an error or it may have logic to terminate the routine call if no result is returned within a timeout. To investigate further check the application log and the application developer to determine what may have caused the application to cancel the call the to routine.
The following entries would appear along with SQLCODE=-1224.
2015-01-01-16.00.55.523000-240 I11763140F558 LEVEL: Error
PID : 2564 TID : 10504 PROC : db2syscs.exe
INSTANCE: DB2 NODE : 000 DB : SAMPLE
APPHDL : 0-12881 APPID: *LOCAL.DB2.XXXXXXX
AUTHID : DB2ADMIN
EDUID : 10504 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, catalog services, sqlrl_findFn_encap_sysfunc_access, probe:400
RETCODE : ZRC=0x80040003=-2147221501=SQLD_INTRP "USER INTERRUPT DETECTED" DIA8003C The interrupt has been received.
2015-01-01-16.00.55.523000-240 I11763700F950 LEVEL: Error
PID : 2564 TID : 10504 PROC : db2syscs.exe
INSTANCE: DB2 NODE : 000 DB : SAMPLE
APPHDL : 0-12881 APPID: *LOCAL.DB2.XXXXXXX
AUTHID : DB2ADMIN
EDUID : 10504 EDUNAME: db2agent (SAMPLE) 0
FUNCTION: DB2 UDB, relation data serv, sqlrr_rds_common_post, probe:1700
MESSAGE : Severe TERMINATE err at nest lvl 1, in SQL from rtn SYSPROC.SYSINSTALLOBJECTS:
DATA #1 : SQLCA, PD_DB2_TYPE_SQLCA, 136 bytes
sqlcaid : SQLCA sqlcabc: 136 sqlcode: -1224 sqlerrml: 0
sqlerrmc:
sqlerrp : SQLRRRCP
sqlerrd : (1) 0x80040003 (2) 0x00000003 (3) 0x00000000
(4) 0x00000000 (5) 0x00000000 (6) 0x00000000
sqlwarn : (1) (2) (3) (4) (5) (6)
(7) (8) (9) (10) (11)
sqlstate: 55032
Scenario #8: SQL4304N rc=5 calling any Java routine
Calling a Java routine returns SQL4304N rc=5. This is usually caused by a configuration issue.
call sqlj.install_jar('file:/home/db2inst1/test.jar', 'test')
SQL4304N Java stored procedure or user-defined function "sqlejReadJar",
specific name "SQL120417123751400" could not load Java class
"COM/ibm/db2/app/sqlejProcs", reason code "5". SQLSTATE=42724
The db2diag.log will contain messages such as:
2012-01-01-12.00.51.415000-300 I56486A540 LEVEL: Warning
PID : 7536704 TID : 1 PROC : db2fmp (8916) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (9416) 0
FUNCTION: DB2 UDB, BSU Java support, sqlejCallJavaRoutine_dll, probe:80
MESSAGE : Class loader loadClass failed. class:
DATA #1 : Hexdump, 26 bytes
0x00000001100B1000 : 434F 4D2F 6962 6D2F 6462 322F 6170 702F COM/ibm/db2/app/
0x00000001100B1010 : 7371 6C65 6A50 726F 6373 sqlejProcs
2012-01-01-12.00.51.417293-300 I60862A1407 LEVEL: Warning
PID : 7536704 TID : 1 PROC : db2fmp (8916) 0
INSTANCE: db2inst1 NODE : 000
EDUID : 1 EDUNAME: db2fmp (9416) 0
FUNCTION: DB2 UDB, BSU Java support, sqlejLogException, probe:10
DATA #1 : String, 982 bytes
com.ibm.db2.jcc.am.SqlException: [jcc][10262][11517][3.61.75] Unexpected Throwable caught: java.lang.NoClassDefFoundError: java.net.InetAddress (initialization failure). ERRORCODE=-4228, SQLSTATE=null
at com.ibm.db2.jcc.am.ed.a(ed.java:660)
Try:
(A) Increase JAVA_HEAP_SZ
(1 ) Stop DB2
As the DB2 instance owner (default is db2inst1)
db2stop
db2 "update dbm cfg using java_hea_sz 16384"
As root, refresh the DB2 permissions:
/opt/IBM/db2/V9.7/instance/db2iupdt db2inst1
Note: Your DB2 installation location and DB2 instance name may be different
(2) Start DB2
db2start
(B) Change the fenced id to a different id to rule out there is something wrong with the fenced id's configuration
(1) As root create a new id such as db2fenc2 and change the fenced id to db2fenc2
(2) As root change fenced id from db2fenc1 to db2 instance owner for
test purposes
mkuser db2fenc2
chown db2fenc2 /home/db2inst1/sqllib/adm/.fenced
(3) Restart the DB2 instance for the above to take effect
db2stop
db2start
Scenario #9: SQL0443 rc=12 (Out of Memory) or ENOMEM
This indicates the fenced userid used to run the stored procedure did not have sufficient memory. The common cause is an incorrectly configured ulimit. This error may be returned when running user routines or DB2's internal routines
The db2diag.log will contain the entry below originating from db2fmp which lists the fenced userid's ulimits
2014-01-01-07.25.02.473698-300 E312054A1828 LEVEL: Error (OS)
PID : 58065026 TID : 1029 PROC : db2fmp (C) 0
INSTANCE: strlprd NODE : 000 DB : SAMPLE
APPID : *LOCAL.sample.140926202503
HOSTNAME: padboms01
EDUID : 1029 EDUNAME: db2fmp (C) 0
FUNCTION: DB2 UDB, SQO Memory Management, sqloLogMemoryCondition,probe:100
CALLED : OS, -, malloc
OSERR : ENOMEM (12) "There is not enough memory available now."
MESSAGE : Private memory and/or virtual address space exhausted, or data
ulimit exceeded
DATA #1 : Soft data resource limit, PD_TYPE_RLIM_DATA_CUR, 8 bytes
134217728
DATA #2 : Requested size, PD_TYPE_MEM_REQUESTED_SIZE, 8 bytes
66654208
DATA #3 : Current set size, PD_TYPE_SET_SIZE, 8 bytes
84738048
134217728 Bytes = 131,072 KB is the current soft limit.
Check ownership of the file to determine fenced userid
$ ls -la /home/db2inst1/sqllib/adm/.fenced
-r--r--r-- 1 db2fenc db2fenc 0 Oct 15 10:57 /home/db2inst1/sqllib/adm/.fenced
Login as db2fenc to check its ulimits, we see DATA is limited to 131,072 KB.
User Limits, '/usr/bin/ulimit -a'
time(seconds) unlimited
file(blocks) unlimited
data(kbytes) 131072
stack(kbytes) 32768
memory(kbytes) 32768
coredump(blocks) 2097151
nofiles(descriptors) 2000
Modify the .profile for db2fenc to include the line below. In this example we change it to unlimited, but you may want to only increase yours instead.
ulimit -d unlimited
Note: If you do not have the DBM CFG parameter KEEPFENCED=NO, the DB2 instance will need to be restarted for the change to take effect since the existing db2fmp processes will still be using the old ulimit values.
Another alternative to make the change permanent is to contact your system administrator to permanently add/modify an entry for db2fenc in /etc/security/limits (UNIX) or /etc/security/limits.conf (Linux).
To check current effective ulimit of a process:
Linux: cat /proc/<db2fmp PID>/limits
AIX: prulimit.pl script provided by third party
Other Aids
The db2diag command can be used to translate any hexadecimal messages such as 0xFFFFFB38 or ZRC=0x8136001C code into a meaningful SQLCODE.
db2diag -rc FFFFFB38
Input ECF string 'FFFFFB38' parsed as 0xFFFFFB38 (-1224).
ERROR: ../sqz/sqlzwhatisrc.C:
Input ZRC 0xFFFFFB38 (-1224) cannot be identified as a V7 or V6 ZRC value
Related Information
[{"Product":{"code":"SSEPGG","label":"Db2 for Linux, UNIX and Windows"},"Business Unit":{"code":"BU058","label":"IBM Infrastructure w\/TPS"},"Component":"Routines (SP \u0026 UDF) - db2fmp","Platform":[{"code":"PF002","label":"AIX"},{"code":"PF010","label":"HP-UX"},{"code":"PF016","label":"Linux"},{"code":"PF027","label":"Solaris"},{"code":"PF033","label":"Windows"}],"Version":"9.8;9.7;9.5;9.1;10.1;10.5;11.1","Edition":"","Line of Business":{"code":"LOB10","label":"Data and AI"}}]
Was this topic helpful?
Document Information
Modified date:
07 December 2022
UID
swg21470035