PQ41531: SETTING THE INIT OIWSNAME(ERROR) AND REMOVING THE WSNAME PARAMETER FROM THE EQQYCAIN JOB,EQQY246E MESSAGE IS ISSUED.

A fix is available

Subscribe

You can track all active APARs for this component.

APAR status

  • Closed as program error.

Error description

  • Setting the INIT OIWSNAME(ERROR) and removing the WSNAME
    parameter from the EQQYCAIN job,the EQQY246E error message
    'Keyword WSNAME used as OI or OICOM argument not allowed'
    is issued.
    

Local fix

Problem summary

  • ****************************************************************
    * USERS AFFECTED: ALL OPC/ESA USERS.                           *
    *                 FUNCTION=BCIT   Batch Command Interface Tool *
    ****************************************************************
    * PROBLEM DESCRIPTION: In OPC releases 2.2.0 and 2.3.0 a BCIT  *
    *                      request to LIST OICOM ends with RC=8    *
    *                      and the error message EQQY246E.         *
    ****************************************************************
    * RECOMMENDATION: APPLY THE PTF FIXING THIS APAR               *
    ****************************************************************
    In OPC releases 2.2.0 and 2.3.0 a BCIT request to LIST OICOM
    ends with RC=8 and the error message MSGEQQY246E.  This APAR
    also fixes all the other problems which can arise in the BCIT
    component as a consequence of the removal in the PIF component
    of the WSNAME argument in all the requests related to the OI
    repository.
    

Problem conclusion

  • Code has been aligned to the PIF change.
                             - - -
     THE FOLLOWING OPC/ESA PUBLICATIONS WILL BE UPDATED:
                             - - -
    +--------------------------------------------------------------+
    |                                                              |
    |TITLE:  OPC Programming Interfaces                            |
    |        Version 2 Release 1            SH19-4378-00           |
    |                                                              |
    |APPENDIX D - Batch Command Interface Tool                     |
    |TOPIC: COPY OI: Copy an operator instruction with arguments   |
    |                change. New (instead of "News": fix it|)      |
    |                arguments begin with N.                       |
    |PAGE: 148 - 2.3.8.2                                           |
    |ACTION: Change the NJOBNAM argument into NJOBNAME argument,   |
    |        that is replace the following command:                |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         WSNAME=workstation_name,             |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NWSNAME=new_workstation_name,        |
    |                         NJOBNAM=new_jobname;"                |
    |        with the following one:                               |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         WSNAME=workstation_name,             |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NWSNAME=new_workstation_name,        |
    |                         NJOBNAME=new_jobname;"               |
    |        Then replace the following description lines:         |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | workstation_name             Character (char(4))             |
    | authority_group_name         Character (char(8))             |
    | new_authority_group_name     Character (char(8))             |
    |                              Character (char(16))            |
    | new_owner                    Character (char(16))"           |
    |        with the following ones:                              |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | workstation_name             Character (char(4))             |
    | new_workstation_name         Character (char(4))             |
    | new_jobname                  Character (char(8))"            |
    +--------------------------------------------------------------+
                             - - -
    +--------------------------------------------------------------+
    |                                                              |
    |TITLE:  OPC Programming Interfaces                            |
    |        Version 2 Release 2            SH19-4378-01           |
    |                                                              |
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: LIST OICOM: List operator instructions.                |
    |PAGE: 83 - last LIST action in the page                       |
    |ACTION: Remove from the LIST OICOM the WSNAME argument, that  |
    |        is replace the following command:                     |
    |"ACTION=LIST,RESOURCE=OICOM,ADID=application_description,     |
    |                            OPNO=operation_number,            |
    |                            WSNAME=workstation_name;"         |
    |        with the following one:                               |
    |"ACTION=LIST,RESOURCE=OICOM,ADID=application_description,     |
    |                            OPNO=operation_number;"           |
    |        Then remove, consistently, the "workstation_name"     |
    |        description, that is the last line of the page.       |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: SELECT OI: List operator instructions of an operation. |
    |PAGE: 87 - third SELECT action in the page                    |
    |ACTION: Remove from the SELECT OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=SELECT,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=SELECT,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: DELETE OI: Suppress an operator instruction.           |
    |PAGE: 93 - first DELETE action in the page                    |
    |ACTION: Remove from the DELETE OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=DELETE,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=DELETE,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: COPY OI: Copy an operator instruction with arguments   |
    |                change. New (instead of "News": fix it|)      |
    |                arguments begin with N.                       |
    |PAGE: 98 - second COPY action in the page                     |
    |ACTION: Remove from the COPY OI the WSNAME arguments, change  |
    |        the NJOBNAM argument into NJOBNAME argument, that is  |
    |        replace the following command:                        |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         WSNAME=workstation_name,             |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NWSNAME=new_workstation_name,        |
    |                         NJOBNAM=new_jobname;"                |
    |        with the following one:                               |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NJOBNAME=new_jobname;"               |
    |        Then replace the following description lines:         |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | workstation_name             Character (char(4))             |
    | authority_group_name         Character (char(8))             |
    | new_authority_group_name     Character (char(8))             |
    |                              Character (char(16))            |
    | new_owner                    Character (char(16))"           |
    |        with the following ones:                              |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | new_jobname                  Character (char(8))"            |
    ================================================================
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: IMPORT OI: Imports an operator instruction             |
    |PAGE: 99                                                      |
    |ACTION: Remove from the IMPORT OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=IMPORT,RESOURCE=OI,ADID=application_description,      |
    |                          NEWADID=new_application_description,|
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=IMPORT,RESOURCE=OI,ADID=application_description,      |
    |                          NEWADID=new_application_description,|
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    +--------------------------------------------------------------+
                             - - -
    +--------------------------------------------------------------+
    |                                                              |
    |TITLE:  OPC Programming Interfaces                            |
    |        Version 2 Release 3            SH19-4378-02           |
    |                                                              |
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: LIST OICOM: List operator instructions.                |
    |PAGE: 89,90 - last LIST action beginning on page 89           |
    |ACTION: Remove from the LIST OICOM the WSNAME argument, that  |
    |        is replace the following command:                     |
    |"ACTION=LIST,RESOURCE=OICOM,ADID=application_description,     |
    |                            OPNO=operation_number,            |
    |                            WSNAME=workstation_name;"         |
    |        with the following one:                               |
    |"ACTION=LIST,RESOURCE=OICOM,ADID=application_description,     |
    |                            OPNO=operation_number;"           |
    |        Then remove, consistently, the "workstation_name"     |
    |        description, one of the lines following the fixed     |
    |        action.                                               |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: SELECT OI: List operator instructions of an operation. |
    |PAGE: 93 - last SELECT action in the page                     |
    |ACTION: Remove from the SELECT OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=SELECT,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=SELECT,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: DELETE OI: Suppress an operator instruction.           |
    |PAGE: 99 - second DELETE action in the page                   |
    |ACTION: Remove from the DELETE OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=DELETE,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=DELETE,RESOURCE=OI,ADID=application_description,      |
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: COPY OI: Copy an operator instruction with arguments   |
    |                change. New arguments begin with N.           |
    |PAGE: 106 - first COPY action in the page                     |
    |ACTION: Remove from the COPY OI the WSNAME arguments, change  |
    |        the NJOBNAM argument into NJOBNAME argument, that is  |
    |        replace the following command:                        |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         WSNAME=workstation_name,             |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NWSNAME=new_workstation_name,        |
    |                         NJOBNAM=new_jobname;"                |
    |        with the following one:                               |
    |"ACTION=COPY,RESOURCE=OI,ADID=application_description,        |
    |                         OPNO=operation_number,               |
    |                         NADID=new_application_description,   |
    |                         NOPNO=new_operation_number,          |
    |                         NJOBNAME=new_jobname;"               |
    |        Then replace the following description lines:         |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | workstation_name             Character (char(4))             |
    | authority_group_name         Character (char(8))             |
    | new_authority_group_name     Character (char(8))             |
    |                              Character (char(16))            |
    | new_owner                    Character (char(16))"           |
    |        with the following ones:                              |
    |"application_description      Character (char(16))            |
    | new_application_description  Character (char(16))            |
    | operation_number             Integer (integer(4))            |
    | new_operation_number         Integer (integer(4))            |
    | new_jobname                  Character (char(8))"            |
    ================================================================
    |CHAPTER 3 - Batch Command Interface Tool                      |
    |TOPIC: IMPORT OI: Imports an operator instruction             |
    |PAGE: 107                                                     |
    |ACTION: replace in the note the words                         |
    |        "the values of opno and wsname (if specified) match   |
    |        the ones" with                                        |
    |        "the value of opno (if specified) matches the one"    |
    |      - Remove from the IMPORT OI the WSNAME argument, that   |
    |        is replace the following command:                     |
    |"ACTION=IMPORT,RESOURCE=OI,ADID=application_description,      |
    |                          NEWADID=new_application_description,|
    |                           OPNO=operation_number,             |
    |                           WSNAME=workstation_name;"          |
    |        with the following one:                               |
    |"ACTION=IMPORT,RESOURCE=OI,ADID=application_description,      |
    |                          NEWADID=new_application_description,|
    |                           OPNO=operation_number;"            |
    |        Then remove, consistently, the "workstation_name"     |
    |        description from the following description lines.     |
    +--------------------------------------------------------------+
    102Y
    202Y
    302Y
    EQQYCCOI
    EQQYCDOI
    EQQYCEOI
    EQQYCLOI
    EQQYCROI
    

Temporary fix

Comments

APAR Information

  • APAR number

    PQ41531

  • Reported component name

    TME 10 OPC V2 R

  • Reported component ID

    5697OPC01

  • Reported release

    200

  • Status

    CLOSED PER

  • PE

    NoPE

  • HIPER

    NoHIPER

  • Special Attention

    NoSpecatt

  • Submitted date

    2000-09-18

  • Closed date

    2000-11-23

  • Last modified date

    2001-03-02

  • APAR is sysrouted FROM one or more of the following:

  • APAR is sysrouted TO one or more of the following:

    UQ49006 UQ49007 UQ49008

Modules/Macros

  • EQQYCCOI EQQYCDOI EQQYCEOI EQQYCLOI EQQYCROI
    

Publications Referenced
SH19437800 SH19437801 SH19437802    

Fix information

  • Fixed component name

    TME 10 OPC V2 R

  • Fixed component ID

    5697OPC01

Applicable component levels

  • R102 PSY UQ49006

       UP01/02/02 P F102

  • R202 PSY UQ49007

       UP01/02/02 P F102

  • R302 PSY UQ49008

       UP01/02/02 P F102

Fix is available

  • Select the PTF appropriate for your component level. You will be required to sign in. Distribution on physical media is not available in all countries.



Rate this page:

(0 users)Average rating

Add comments

Document information


More support for:

z/OS family

Software version:

200

Reference #:

PQ41531

Modified date:

2001-03-02

Translate my page

Machine Translation

Content navigation