|
|
|
Removing
the front system fan assembly
Attention:
- Replace a
failed fan within 48 hours
- To ensure
proper cooling and airflow, do not operate the HMC for more than
30 minutes with the side cover removed.
To remove the
front system fan assembly:
- Turn off
the HMC and peripheral devices and disconnect all power cords.
- Unlock and
remove the side cover. (Refer to Removing
and Replacing the Cover.)
Start
the video ...
- Disconnect
the fan assembly cable from the system board, making a note of
where the cable was connected for later installation.
- Press and
hold the drive cage release tab. Then, rotate the drive cage out
of the chassis (about 3/4 of the way).
- Disconnect
the blue power cables.
- Rotate the
drive cage out of the chassis the rest of the way until the retaining
tab on top of the cage locks into place.
- Press the
front system fan assembly release tabs. Then, rotate the fan assembly
away from the drive cage slightly.
- Remove the
blue power cables from the slots on the fan assembly. Then, rotate
the fan assembly away from the drive cage and remove the fan assembly
from the drive cage.
- If you are
instructed to return the fan assembly, follow all packaging instructions,
and use any packaging materials supplied to you for shipping.
|
|
|
|
|
|