|
Removing
the riser card assembly
To remove the
riser card assembly:
- Turn off
the HMC and peripheral devices and disconnect all power cords.
- Remove the
cover. (Refer to Removing
and Replacing the Cover.)
- If an adapter
is installed in the riser card assembly, disconnect any cables
connected to the adapter.
- Grasp the
riser-card assembly at the rear edge and lift to remove the riser-card
assembly.
- Place the
riser-card assembly on a flat, static-protective surface.
- If an adapter
is present, carefully grasp the adapter by its top edge or upper
corners and pull the adapter from the riser-card assembly.
- If you are
instructed to return the riser card assembly, follow all packaging
instructions, and use any packaging materials supplied to you
for shipping.
|