2.4 Model 7042-C06 HMC Specifications
 
 

Microprocessor:

  • One Intel® Xeon™ 2.13 GHz dual-core
  • 2x 1 MB Level-2 cache
  • 1066 MHz front-side bus (FSB)

Memory:

  • Two 512 MB (1 GB total memory)
  • Type: PC2-5300 ECC DDR2 SDRAM
  • Connectors: two dual inline memory module (DIMM) connectors, two-way interleaved

Drives:

  • Hard disk drive: One 80 GB SATA
  • One CD-RW/DVD-RAM Multiburner
  • Diskette (optional internal or external USB): 1.44 MB

Drive bays:

  • Two 5.25 inch bays (one optical drive installed)
  • One 3.5 inch removable-media drive bay
  • Four 3.5 inch hard disk drive bays

PCI expansion slots:

  • One PCI Express x8 slot
  • One PCI Express x1 slot
  • Three PCI 32-bit/33 MHz slots

Fans:

  • Three speed-controlled fans

Power supply:

  • One 400 - 670 watt

Size:

  • Height: 438 mm (17.25 inches)
  • Depth: 540 mm (21.25 inches)
  • Width: 216 mm (8.5 inches)
  • Weight: 16.3 kg (36 lb)

Integrated functions:

  • Mini baseboard management controller (mini-BMC)
  • One integrated 10/100/1000 Mbps Ethernet port
  • Two serial ports
  • Four-port Serial ATA controller
  • Six Universal Serial Bus (USB) v2.0 ports (two on front and four on rear)
  • One graphic port
  • Keyboard port
  • Mouse port
  • Modem (possible internal or external)
  • ATA-100 single-channel IDE controller (bus mastering)
  • ATI ES1000 video controller
    • Compatible with SVGA and VGA
    • 16 MB SDRAM video memory
 
 

Diagnostic LEDs :

  • Fans
  • Memory
  • Power supply

Acoustical noise emissions:

  • Sound power, idling: 5.0 bels
  • Sound power, operating: 5.3 bels

Environment:

  • Air temperature:
    • Server on: 10° to 35°C (50.0° to 95.0°F)
    • Server off: 0° to 50°C 32° to 140°F)
  • Altitude: 2133 m (7000.0 ft)
  • Humidity (operating and storage): 8% to 80%

Heat output:

Approximate heat output in British thermal units (Btu) per hour:

  • Minimum configuration: 630 Btu per hour (185 watts)
  • Maximum configuration: 1784 Btu per hour (523 watts)

Electrical input:

  • Sine-wave input (50 or 60 Hz) required
  • Input voltage and frequency ranges automatically selected
  • Input voltage low range:
    • Minimum: 100 V AC
    • Maximum: 127 V AC
  • Input voltage high range:
    • Minimum: 200 V AC
    • Maximum: 240 V AC
  • Input kilovolt-amperes (kVA), approximately:
    • Maximum: 0.55 kVA

 

Notes:

  1. Power consumption and heat output vary depending on the number and type of optional features installed and the power-management optional features in use.
  2. These levels were measured in controlled acoustical environments according to the procedures specified by the American National Standards Institute (ANSI) S12.10 and ISO 7779 and are reported in acordance with ISO 9296. Actual sound-pressure levels in a given location might exceed the average values stated because of room reflections and other nearby noise sources. The declared sound-power levels indicate an upper limit, below which a large number of computers will operate.

 

 

 

 

   
   
Course Home
 
Course Topics
 
Course
Terminology
 
Page 1 of 1