|
Enabling
Access to the HMC Using a Web Browser
In order to
enable remote browser access to the HMC, you must modify the firewall
settings of the Ethernet adapter on the HMC. By default, remote
browser access to the HMC is disabled.
Note:
HMC tasks that require removable media cannot be performed remotely.
You can use
the Guided Setup Wizard, the Change Network Settings tasks, or the
Remote Operations task to enable remote browser access to the HMC.
Using
the Guided Setup Wizard or the Change Network Settings Task
The
steps to enable remote browser access using the Guided Setup Wizard
and the Change Network Settings task are similar. The following
steps use the Change Network Settings task:
- In the Navigation
Pane, select HMC Management.
- In the Work
Pane, select Change Network Settings.
The Change Network Settings window displays.
- In the Change
Network Settings window, select the LAN Adapters
tab.
- In
the LAN Adapters panel, select Details... The
LAN Adapter Details window displays.
- In
the LAN Adapter Details window, select the Firewall Setting
tab.
- Under
Available Applications, select Secure Remote Web Access.
- You can allow
any IP address through the firewall or you can allow one or more
specific IP addresses through the firewall.
- If you
want to allow any IP address through the firewall, click Allow
Incoming.
- If
you want to allow specific IP addresses through the firewall,
- Click
Allow Incoming by IP Address.
- In
the Hosts Allowed window, enter the IP address and the
network mask.
- Click
Add.
- Click
OK.
- In the LAN
Adapter Details window, click OK.
|