Today IBM is releasing two new N6200 systems that will be a huge improvement over the existing N6000 systems. The two new systems will show a bump in capacity and performance and more flexibility. For a very crowded midrange market this new N series product set will bridge the gap between entry level and enterprise class systems
One of the biggest issues with the previous 6000 systems was the limited amount of PCI-e slots. The other issue is the lack of more common hardware onboard like SAS and 10gbps ethernet.
The first thing that stands out to me is the footprint of the new system. The older N6000 has a 6 U requirement for an HA pair. The new N6200 is half the size, only occupying 3U for the two HA pair, or a single node with a I/O expansion module, providing an additional four PCI-e cards. Another configuration is two controllers with two expansion modules in a total space of 6U (equal of the older N6000 systems) but with a total of 12 PCI-e slots (vs 8 on the older N6000).
We will recommend using the two slots built into the controller for high performance 10GbE and / or 8 Gb PC adapters. The additional expansion slots in the expansion module can be used for Flash Cache and other connectivity for disks.
The on-board hardware is getting an face lift as well. While the new system sports a 10GbE port this is used mainly for the interconnect and nothing else. This was one of the disappointments I have with this systems, but understand this is how Netapp will accomplish scale out clustering.
FC ports were kept at 4 Gbps but there is two new SAS ports with matching ACP (alternate control path) ports used for off loading some of the traffic from the data path.
One of the unsung updates was in the NVRAM. Instead of using the same memory in the past, we now see an improvement of the memory by using something called Asynchronous DRAM Refresh (ADR). This is a new self-refresh mode in the Intel chipset that allows a portion of the main memory to be backed by an on-board battery. This gives the NVRAM the same high bandwidth as main memory and also simplifies the design of the motherboard.
This gives the new N6200 systems a bump in performance along with the introduction of the new Intel processors. The SPECsfs benchmark on the highest N6200 system showed 101,183 ops at 1.66ms ORT compared to the N6060 showing 60,507 ops and 1.58ms ORT, an improvement of about 70% in SFS throughput.
IBM is introducing the IBM System Storage N6210 Series and the IBM System Storage N6240 Series These new systems replace the IBM N3600 and N6040 Series respectively. GA date is scheduled for January 28, 2011 (N6240) and February 25, 2011(N6210). Here is the slide deck that is published with the release.