Volume Capable | Volume Reason | Description |
---|---|---|
1 | 0 (X'00') | The volume is source capable. |
2 | 0 (X'00') | The volume is target capable. |
0 | . | The volume is not currently Fast Replication capable. The volume reason will have a non-zero value indicating the current cause for being incapable. |
0 | 1 (X'01') | The maximum number of FlashCopy® relationships are active on the volume. |
0 | 2 (X'02') | The volume is a PPRC Primary volume. |
0 | 3 (X'03') | The volume is a PPRC Secondary volume |
0 | 4 (X'04') | The volume is a Concurrent Copy source. |
0 | 5 (X'05') | The volume is extended Remote Copy source. |
0 | 6 (X'06') | The volume is currently inhibited from starting any FlashCopy operations. |
0 | 7 (X'07') | A volume level (phase 1) FlashCopy relationship is active on this volume. |
0 | 8 (X'08') | The maximum number of FlashCopy relationships for the Enterprise Storage Server® (ESS) are active. |
0 | 9 (X'09') | The volume is currently inaccessible. |
0 | 10 (X'0A') | Asynchronous PPRC Primary target active for volume. |
0 | 11 (X'0B') | Full volume target relation exists on the volume. |
0 | 12 (X'0C') | Full volume source relation exists on the volume. |
0 | 13 (X'0D') | Maximum full volume relations exist on the volume. |
0 | 14 (X'0E') | Volume is space efficient, target capability requested and SETGTOK=YES was not specified, or Preserve Mirror was specified. |
0 | 15 (X'0F') | The volume is in the process of a PPRC cascading failover/failback recovery operation or the PPRC volume was established with incremental resynchronization started, and target capability checking was requested. |
0 | 16 (X'10') | The volume is a cascaded PPRC volume. |
0 | 17 (X'11') | The volume is not capable of data set level FlashCopy operations. (Space efficient volumes are not eligible for data set level FlashCopy operations.) |
0 | 18 (X'12') | The volume is not capable of inhibiting writes to the source. |
0 | 200 (X'C8') | The volume cannot be found. |
0 | 201 (X'C9') | The volume does not support FlashCopy. |
0 | 202 (X'CA') | The volume and the control volume are not in the same subsystem. |
0 | 203 (X'CB') | An I/O error was detected when obtaining FlashCopy status of the volume.
To obtain a diagnostic ABEND dump from the ANTMAIN address space that will provide additional information about the error, issue system command F ANTAS000,CTFLG ABEND_LIC ON, and resubmit the failing request. Once the dump has been obtained, issue system command F ANTAS000,CTFLG ABEND_LIC OFF. |
0 | 204 (X'CC') | The volume does not have the same track geometry as the control volume. |
0 | 205 (X'CD') | A VM formatted MVS minidisk. |
0 | 206 (X'CE') | An I/O timeout was detected when obtaining FlashCopy status of the volume. |
0 | 207 (X'CF') | The specified extent is outside the volume's capability. |