HD59861: CATDUA: SPEC TREE AND GEOMETRY LOST AFTER CLEANING DATA BY CATD UA.

APAR status

• Closed as Permanent restriction.

Error description

• CATDUA: SPEC TREE AND GEOMETRY LOST AFTER
  CLEANING DATA BY CATDUA.
  .
  SCENARIO:
  0) Start CATIA.
  1) Open the file: "D0288.CATPart".
  Workbench: "GSD" or "Part Design".
  2) Select "File" > "Desk" by menu bar. "Desk"
  window is displayed.
  3) Click "D0288.CATPart" on the tree by MB3.
  4) Select "CATDUAV5" by context
  menu. "CATDUAV5" dialog box is displayed.
  5) Select "Clean".
  6) Click "Run". "CATDUAV5" is performed. The
  error of "MGN_9" and "LIF_1" are found out.
  7) Click "Exit".
  8) Close "Desk" window. "D0288.CATPart" window
  is displayed. The specification tree and geometry is
  lost. This is problem.
  .
  .
  

Local fix

Problem summary

• CATDUA: SPEC TREE AND GEOMETRY LOST AFTER CLEANING DATA BY CATD
  UA.
  CATDUA: SPEC TREE AND GEOMETRY LOST AFTER
  CLEANING DATA BY CATDUA.
  .
  SCENARIO:
  0) Start CATIA.
  1) Open the file: "D0288.CATPart".
  Workbench: "GSD" or "Part Design".
  2) Select "File" > "Desk" by menu bar. "Desk"
  window is displayed.
  3) Click "D0288.CATPart" on the tree by MB3.
  4) Select "CATDUAV5" by context
  menu. "CATDUAV5" dialog box is displayed.
  5) Select "Clean".
  6) Click "Run". "CATDUAV5" is performed. The
  error of "MGN_9" and "LIF_1" are found out.
  7) Click "Exit".
  8) Close "Desk" window. "D0288.CATPart" window
  is displayed. The specification tree and geometry is
  lost. This is problem.
  .
  .
  

Problem conclusion

• THIS PROBLEM IS PERMANENT RESTRICTION IN
  CATIA.
  .
  Incident Diagnosis:
  CATDUA: SPEC TREE AND GEOMETRY LOST AFTER
  CLEANING DATA BY CATDUA.
  .
  Restriction Explanation:
  This data is strongly corrupted. The Part feature in
  the model is agregated under an Intersect feature
  which is NOT agregated anywhere (not seen by the
  end user). And it is among many other non
  agegated intersect features. These non agregated
  features are detected and deleted by a cleaner rule
  (LIF_1). The deletion of the intersect that agregates
  the part triggers the deletion of the part itself and
  leads to the situation with an empty editor.
  .
  This comes certainly from coding errors in CAA
  applications. If user has a scenario where the part
  is correct and it becomes corrupted after using
  CATIA commands, then maybe the behavior can
  be analysed further.
  .
  .
  

Temporary fix

Comments

APAR Information

• APAR is sysrouted FROM one or more of the following:

• APAR is sysrouted TO one or more of the following:

Fix information

Applicable component levels